Scan To Mailbox Setup; Information Checklist; Scan To Ftp/Smb - Xerox WorkCentrePro 123 System Administration Manual

Scan to FTP/SMB

You can send the scanned documents through a TCP/IP network to a computer
(server) such as an FTP or SMB server.

Scan to Mailbox Setup

Information Checklist

Before enabling the feature, make sure that the following items are available or have
been performed. If Kerberos has been enabled, refer to Remote Authentication Setup
(If Required) on page 133.
An existing operational network utilizing TCP/IP is required. These
procedures are not designed to install a network.
Obtain and record the following information:
• IP address
• Gateway address
• Subnet mask
• Host name
Refer to the Glossary for additional information about the Gateway Address
and Subnet mask.
Test the machine to make sure that it is installed fully and functioning
correctly.
Mailboxes need to be created on the touch screen of the machine or via
CentreWare Internet Services.
Install the scan driver.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
scan
Computer
Item

Scan to Mailbox Setup

Network
By
Customer
Customer
Customer
Customer
Customer
127