Problems Using An Smb Environment - Xerox WorkCentrePro 123 System Administration Manual

When there is no notification of error
When there is no message displayed on the client which has sent print request, the
possible causes, confirmation methods, and actions are as follows.
When there is no notification of printer error
The user is not registered in
the Notify list of the print
server.
When there is no notification of the completion of the job
When sending the print job
from the client, the NOTIFY
option is not specified.
NetWareCASTOFF has been
executed on the client.
When sending a job using
NPRINT/CAPTURE/
PCONSOLE, the NOTIFY
option is not specified.

Problems using an SMB Environment

This section explains what to do when a problem occurs while using SMB. The possible
causes, confirmation methods, and actions are as follows. If a problem still exists after
the corrective action has been performed, follow the Problem Solving Procedures on
page 145 to seek further assistance.
When the machine is not found from client computers – page 152
When printing fails – page 153
When the document cannot be deleted from the printer window – page 153
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
Cause Confirmation Method
Use NAWADMIN or
PCONSOLE to check
whether the user name or
group name of the job is
registered.
Cause Confirmation Method
When sending the print job,
check whether the NOTIFY
option has been specified.
When sending the job using
NPRINT/CAPTURE/
PCONSOLE, check whether
the NOTIFY option has been
specified.

Problems using an SMB Environment

Register the user name or
group name of the job.
When sending the print job,
specify the NOTIFY option.
Execute NetWareCASTON
–
on the client.
When sending the job using
NPRINT/CAPTURE/
PCONSOLE, specify the
NOTIFY option.
Action
Action
151