Xerox WorkCentrePro 123 System Administration Manual page 63

Selecting a paper type
The following parameters can be specified.
PTS/pts
PT1/pt1
PT2/pt2
POH/poh
PTP/ptp
PLB/plb
PQU/pqu
PRC/prc
Specifying double-sided printing
The following parameters can be specified.
DUP/dup
TUMBLE/tumble
SIMP/simp
NOTE: If several parameters are specified in an lpr command, data may not print
correctly.
NOTE: The system default is used if no parameter is specified.
NOTE: If the print data specifies double-sided or single-sided printing, those
specifications take priority over any -C option.
Specifying paper size and double-sided printing
Select a paper size and a binding option. The following parameters can be specified:
A3D/a3d
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
Parameter
Parameter
Parameter
Description
Selects plain paper.
Selects thick paper 1.
Selects thick paper 2.
Selects transparency.
Selects tracing paper.
Selects labels.
Selects bond paper.
Selects recycled paper.
Description
Double-sided printing as follows:
Double-sided printing as follows:
Single-sided printing
Description
Double-sided printing on A3 (297 × 420 mm/11.7 × 16.5
inches) paper and long-edge binding
-C Option
A B
A B
C D
63