Powering Off; Cabling; Interface Ports - Xerox WorkCentrePro 123 System Administration Manual

1.
Press the power switch to the
<I> position.
NOTE: If the machine does not start
up, check that the RESET button on
the back of the machine is in the
reset position.

Powering Off

When you switch off the machine, if it is equipped with the optional hard disk, it remains
on for approximately 10 seconds while it stores files and prepares for shutdown. The
machine then shuts down completely.
NOTE: Wait at least 20 seconds between powering the system on and off. Failure to
do this could cause damage to the hard disk.

Cabling

Interface Ports

The machine has multiple interface ports as shown in the following diagram.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
Cabling
Parallel Port
Ethernet Port
USB Port
17