Software Support; Management Software; Command View Eva Iscsi Connectivity Configuration 1 - HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays Reference Manual

Software support

This section describes the software supported by the EVA iSCSI Connectivity Option.

Management software

The required minimum versions of Command View EVA management software are as follows:
Command View 9.0.1 or later is required for EVA6400/8400.
Command View 8.1 or later is required for array-based management.
Command View 8.0.1 or later is required for EVA4400 (embedded switch) storage systems.
Command View 8.0x or later is required for the mpx100/100b running firmware version 2.4x
or later.
The EVA iSCSI Connectivity Options support Command View EVA iSCSI connectivity (Fibre
Channel switch not required).
See Figure 138
deployment white paper at http://h18006.www1.hp.com/storage/sanwhitepapers.html.
NOTE:
HP StorageWorks mpx Manager is required for mpx100/100b management.
Discovery Presented
IP address iSCSI targets
D1
Figure 138 Command View EVA iSCSI connectivity configuration 1
.
and Figure 139 and refer to the HP StorageWorks Command View EVA iSCSI
mpx100/100b
FP1B
MGMT
HP StorageWorks MGMT
mpx100
IOIOI
FP1A
!
FC1 FC2 GE1 GE2
FC1 FC2 GE1
IP network
management
(WAN/LAN)
IP network
iSCSI data
D1
NIC
(LAN/VLAN)
EVA
Storage System
SAN Design Reference Guide
iSCSI initiator &
Command View
EVA server
26484b
371