Xp Continuous Access Ifcp Gateway Support - HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays Reference Manual

Table 177 XP Continuous Access iFCP gateway support
Product and minimum
supported firmware
version
Brocade-McDATA-CNT
Edge 1000 and 1100
Firmware: 1.5.1.2.7
Brocade-McDATA-CNT
Edge 1001 and 1101
FC
Firmware: 1.5.1.2.7
Brocade-McDATA-CNT
Edge 3000
Firmware: 3.1.1.3,
3.1.2, 3.1.4, 3.1.5
McDATA-Nishan
IPS3300
McDATA-Nishan
IPS4300
McDATA Eclipse 2640
and 1620
Firmware: 4.07 or 4.4.0
XP storage system
XP1024
XP128
XP512
XP48
XP1024
XP128
XP512
XP48
XP24000 XP1024
XP20000 XP128
XP12000 XP512
XP10000 XP48
XP12000 XP128
XP10000 XP512
XP1024 XP48
XP12000 XP128
XP10000 XP512
XP1024 XP48
XP24000 XP1024
XP20000 XP128
XP12000 XP512
XP10000 XP48
(1620 only
for
XP512/48)
Firmware earlier than 1.5.1 requires a remote switch license
Supported switches: B-series 2400/2800, FC8B, and FC16B; M-series:
Edge 2/16, 2/24, and 2/32
Data compression possible
Note: This converter has been discontinued. There is limited support for existing
installations.
Firmware earlier than 1.5.1 requires a remote switch license
Supported switches: B-series 2400/2800, FC8B, and FC16B; M-series
Edge 2/16, 2/24, and 2/32
Data compression possible
Note: This converter has been discontinued. There is limited support for existing
installations.
Supported switches: B-series 2/128, 2/64, 2/32, 2/16, 2/8, 2800,
1
and 2400
Can be used in FCIP direct configuration
Data compression possible
No remote switch license required
Maximum transmission rate from 16 Mb/s to 1 Gb/s
Contact an HP storage representative.
Contact an HP storage representative.
Supported switches: M-series Edge Switch 2/12, 2/16, 2/24, 2/32;
Director 2/140, 2/64; McDATA 4400, 4700
Can be used as a switch and iFCP gateway with XP storage systems
nl
directly connected
SAN Design Reference Guide
Notes
1
1
351