Xp Continuous Access Wdm Configurations; Xp Continuous Access Wdm Distances And Equipment - HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays Reference Manual

WDM
Figure 121 shows XP Continuous Access WDM (CWDM and DWDM) configurations.
describes the maximum supported distances and equipment.
RCU
I
RCP
LCP
Local
Figure 121 XP Continuous Access WDM configurations
.
Table 173 XP Continuous Access WDM distances and equipment
Configuration
Fibre Channel
ESCON
WDM
MME
WDM
MME
For supported distances, see
Note: For Synchronous replication, distance impacts performance. HP recommends a
maximum distance of 200 km when using dark fiber.
XP Continuous Access is supported with all WDM products supported by the switch
vendors (see "Certified third-party WDM
50 km
Nortel Optera Metro 5200/5100
Movaz RAYexpress
MME
MME
Maximum distance and equipment
Table 77, Table 78, and
products" on page 353).
SAN Design Reference Guide
Table 173
I
RCU
LCP
RCP
Remote
25328a
Table 80.
343