Thread Dial
Figure 86
Figure 86.
NOTICE
When threading, we recommend you use
the slowest speed possible and make multi-
ple light cuts. This will give you better con-
trol of when to engage/disengage the half-
nut and prevent damaging the workpiece or
lathe.
Thread Indicator Table
Figure 87
Figure 87.
SCALE
Figure 88.
NOTICE
The thread dial is not used for metric or
fractional TPI threading. You must leave the
halfnut lever engaged from the beginning
until the threads are complete for these
threading operations.
T.P.I.
Figure 88