4.
5.
Note: The jaws are numbered from 1–3 and
are designed to be installed in this order so
that they will hold the concentric workpiece
evenly.
6.
Figure 44.
7.
Figure 44
Steps 6–7
8.
Steps 6–7
9.
Securely
workpiece and remove
the chuck key before
connecting the lathe to
power! Objects thrown
from the lathe could cause
death or serious personal
injury to the operator or
bystanders
away.
Mounting Workpiece
Items Needed
To mount a workpiece in the 3-jaw chuck:
1.
2.
3.
mount
the
many
feet
Qty