Bleeding Brake System
Items Needed
To bleed the air from the brake system:
1.
2.
3.
4.
Important: Continually monitor the brake
fluid lever in the reservoir and make sure that
it stays full. If the reservoir empties, additional
air will be forced into the hydraulic line and
you will have to re-start this procedure from
the beginning.
5.
6.
Figure 136
Qty
Step 5
Figure 136.
7.
Figure 136
8.
9.
10.
Important: Before fully tightening the bracket
hex bolts, adjust the bracket to make sure
the brake pads are equally centered on the
rotor.
11.
12.