10.
Figure 21
11.
12.
13.
14. For the Model G9731 Only:
Phase Polarity
14
11–14
15.
ON
16.
17.
OFF
Page
Steps
Adjustments
During the first 16 hours of use, the V-belts
will stretch and seat into the pulley grooves.
The V-belts must be properly re-tensioned
after this period to avoid reducing their use-
ful life. Refer to V-Belts Service on Page 83
for detailed instructions.
OFF
Note: After using the foot brake to stop the
lathe, it is necessary to move the spindle
ON/OFF lever to the OFF position before
attempting to re-start spindle rotation.
OFF
Spindle Break-In
NOTICE
OFF
Recommended