NOTICE
When the carriage is engaged with the
leadscrew during threading operations,
these stops WILL NOT stop carriage move-
ment—you MUST use the halfnut lever
instead. Otherwise, the carriage can crash
into the chuck or the leadscrew shear pin
can break.
Before doing any threading operations,
make sure the carriage stops WILL NOT
meet during the operation.
Tools Needed
To setup the carriage stops:
1.
2.
3.
4.
5.
Qty
Figure 71
Manual Feed
Figure 72.
Carriage Handwheel
Cross Slide Handwheel
Compound Rest Handwheel
Figure 72