Four-Way Tool Post
Installing Tool
Tool Needed
To load the tool post:
1.
Figure 68
Figure 68.
Over-extending a cutting tool from the tool
post will increase the risk of it breaking dur-
ing operation, which may cause metal pieces
to be thrown with great force at the operator
or bystanders. Only extend a cutting tool 2.5
times the width of its cross-section or less
(e.g., 2.5 x 0.5" = 1.25").
2.
3.
Aligning Cutting Tool with Spindle
Centerline
Figure 69
Qty
Figure 69.
Aligning Tailstock To Spindle Centerline
Page 44