Removing Tooling; Offsetting Tailstock - Grizzly G9730 Owner's Manual

To install tailstock tooling:
1.
2.
Note: This will prevent the tapered surfaces
seizing under operational pressures, which
could make it very difficult to remove the
tool.
3.
4.
5.
Figure 53

Removing Tooling

Figure 56
Figure 56.

Offsetting Tailstock

Figure 57
Note: The marks on the offset indicator are arbi-
trary. For a precise offset, use a dial indicator to
check quill movement while making adjustments.
Figure 57.