Section 2: Power Supply - Grizzly G9730 Owner's Manual

SECTION 2: POWER SUPPLY

Availability
Electrocution,
equipment damage may
occur if machine is not
correctly grounded and
connected to the power
supply.
Full-Load Current Rating
G9730 Full-Load Current Rating ....... 20 Amps
G9731 Full-Load Current Rating ...... 7.5 Amps
Circuit Information
For your own safety and protection of
fire, or
property, consult a qualified electrician if
you are unsure about wiring practices or
electrical codes in your area.
Note: The circuit requirements listed in this man-
ual apply to a dedicated circuit—where only one
machine will be running at a time. If this machine
will be connected to a shared circuit where mul-
tiple machines will be running at the same time,
consult a qualified electrician to ensure that the
circuit is properly sized for safe operation.
Circuit Requirements for 220V
G9730:
Nominal Voltage .............................. 220V/240V
Cycle ..........................................................60 Hz
Phase ........................................... Single-Phase
Circuit Rating ...................................... 30 Amps
Plug and Receptacle ....................NEMA L6-30
Cord .........3-Wire, 10 AWG, 300VAC, "S"-Type
G9731:
Nominal Voltage .............................. 220V/240V
Cycle ..........................................................60 Hz
Phase .................................................... 3-Phase
Circuit Rating ...................................... 15 Amps
Plug and Receptacle .....................NEMA 15-15
Cord .........4-Wire, 14 AWG, 300VAC, "S"-Type