Grizzly G9730 Owner's Manual page 40

6.
7.
8.
Figure 34.
Step 4
Figure 34
Installing & Adjusting Camlock
Studs
Tip: When the camlock studs are correctly installed
and adjusted, and the chuck or faceplate mounts
evenly onto the spindle, make opposing and
unique matching registration marks on the sides
of the spindle and chuck/faceplate. Align these
registration marks when you next mount the chuck
or faceplate to ensure that the correct spindle
mounting hole is used by each stud.
Tool Needed
To install or adjust camlock studs into a chuck
or faceplate:
1.
2.
Figure 35
Figure 35.
Qty