Display Mask - Toshiba SATELLITE M30-35 Series Maintenance Manual

4.24 Display Mask

4.24 Display Mask
Removing the Display Mask
To remove the display mask, follow the steps below and refer to figures 4-38.
1. Remove the two mask seals at the lower part of the display mask.
2. Remove the four rubber masks at the top of the display mask.
3. Remove the following screws securing the display mask.
• M2.5×6B
• M2×4B
4. Release the latches on the display mask and remove the display mask.
Mask seals
M2.5×6B FLAT HEAD
Rubber masks
M2×4B S-FLAT HEAD
Satellite M30-35 Maintenance Manual (960-455)
FLAT HEAD screw
S-FLAT HEAD screw
Figure 4-38 Removing the display mask
4 Replacement Procedures
×2
×3
Mask seals
M2.5×6B FLAT HEAD
4-61