4.20 Speaker
4.20 Speaker
Removing the Speaker
To remove the speaker, follow the steps below and refer to figures 4-31 and 4-32.
1. Remove the following screws and peel the insulator.
• M2.5×6B
• M2.5×4B
M2.5×4B FLAT HEAD
Satellite M30-35 Maintenance Manual (960-455)
FLAT HEAD screw
FLAT HEAD screw
M2.5×6B FLAT HEAD
Figure 4-31 Removing the speakers
4 Replacement Procedures
×4
×1 (upper left side)
M2.5×6B FLAT HEAD
Insulator
4-53
Need help?
Do you have a question about the SATELLITE M30-35 Series and is the answer not in the manual?
Questions and answers