Page 1 ® Satellite Series User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 155 in this guide. M30X/M35X “If Something Goes Wrong” on...
Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
This device may not cause harmful interference. ❖ This device must accept any interference received, including interference that may cause undesired operation. Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 ETS 300 328 Technical requirements for radio equipment ETS 300 826 General EMC requirements for radio equipment. English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Page 10 Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Page 11 Caution: Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 12 Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Page 13: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 14: Radio Approvals For Wireless Devices
Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only Radio approvals for wireless devices NOTE The following information is dependent on what type of wireless device is in...
Page 15 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 17 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 18 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 19: Bluetooth Wireless Technology Interoperability
New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
Page 20: Bluetooth Wireless Technology And Your Health
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...
Page 21: Regulatory Statements
community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization.
Page 22 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 23 Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications. In event that any interference is found, the use of such electric machinery shall be stopped immediately, and reusing of such products can be resumed until no interference occurs after improvement.
Page 24 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 25 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 26 ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wireless Alliance. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Page 27 Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 28: Table Of Contents
Other precautions ...45 Important information on your computer’s Setting up your computer ...47 Setting up your software...48 Registering your computer with Toshiba ...49 Adding external devices ...49 Connecting to a power source ...50 Charging the main battery...53 cooling fan ...47...
Page 29 Using the computer for the first time ...54 Opening the display panel ...54 Your computer’s features and specifications ...55 Turning on the power...55 Using the TouchPad™...56 Scrolling with the TouchPad™ ...56 Using the Scroll button ...57 Using the Control buttons ...57 Disabling or enabling the TouchPad ...57 Installing additional memory (optional) ...58 Removing a memory module...62...
Page 30 Caring for CD or DVDs Discs ...99 Powering down the computer ...100 Using the Turn off computer or Shut down Shutting down more quickly ...101 Using Hibernation Mode ...103 Using Standby Mode...107 Toshiba’s online resources ...110 ® special keys...80 command...100 ® Explorer ...84...
Page 31 Chapter 3: Mobile Computing... 111 Toshiba’s energy-saver design...111 Running the computer on battery power ...111 Battery Notice ...112 Power management ...112 Using additional batteries ...113 Charging the batteries...113 Charging the main battery...114 Charging the RTC battery...115 Monitoring battery power ...116 Determining remaining battery power...117...
Page 32 Contents Internet Service Providers...140 Connecting to the Internet ...140 Surfing the Internet...141 Internet features...141 Uploading and downloading files from the Exploring video features ...142 Changing the display properties setting ...143 Display settings hot key ...143 Exploring audio features ...144 Recording sounds...144 Using a microphone...144 Adjusting recording settings ...145 Using external speakers or headphones...146...
Page 33 Modem problems...179 Develop good computing habits ...179 If you need further assistance...181 Before you call ...181 Contacting Toshiba ...182 Other Toshiba Internet Web sites ...183 Toshiba’s worldwide offices...183 ® operating system is not working ..159 ® XP operating system can help you ...161...
Page 34 Enabling a wireless device ...192 Disabling or enabling the TouchPad ...192 Keyboard hot keys ...193 Appendix B: Power Cord/Cable Connectors...194 Appendix C: Using ConfigFree™ with your Toshiba Computer...195 Getting Started...196 Starting ConfigFree ...196 ConfigFree Utilities...197 Connectivity Doctor ...197 Search for Wireless Devices ...200 Profile Settings ...202...
Page 35: Introduction
Internet access. This guide contains information about your operating system and how it functions with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with your computer.
Page 36: This Guide
Toshiba's Web site at While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 37: Safety Icons
Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 38: Other Icons Used
Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery media (if applicable to your system). ❖ For accessory information, visit Toshiba's Web site at accessories.toshiba.com. ❖ The Microsoft documentation which explains the features of the operating system.
Page 39: Service Options
Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page...
Page 40: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 41: Keeping Yourself Comfortable
❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Page 42 Getting Started Selecting a place to work Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. ❖ Place the computer on a flat surface at a comfortable height and distance. You should be able to type without twisting your torso or neck, and look at the screen without slouching.
Page 43 Whichever type you choose, use the following guidelines to adjust your chair for maximum computing comfort. ❖ Position your chair so that the keyboard is at or slightly below the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor.
Page 44: Work Habits
Getting Started Selecting a place to work Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes. Arms and wrists ❖...
Page 45: Other Precautions
computer frequently and focus your eyes on a distant object for at least 30 seconds. Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.
Page 46 Getting Started Selecting a place to work Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is used extensively. Overheating of a PC Card can result in errors or instability in the PC Card operation.
Page 47: Important Information On Your Computer's Cooling Fan
Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked.
Page 48: Setting Up Your Software
A window displays asking if you wish to register with Toshiba and Microsoft. Click Yes to register, or No to exit the process. If you click No, you may register with Toshiba by clicking the NOTE Register with Toshiba icon on the desktop.
Page 49: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 50: Connecting To A Power Source
Getting Started Connecting to a power source ❖ Install PC Cards (see Connecting to a power source Your computer requires power to operate. Use the power cord/cable and AC adapter to connect the computer to a live electrical outlet, or to charge the computer’s battery. Power cord/cable Sample power cord/cable and AC adapter Hold the power cord/cable by its plug when you connect/...
Page 51 Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter. To connect AC power to the computer: Connect the power cord/cable to the AC adapter.
Page 52 Getting Started Connecting to a power source Plug the AC adapter cord into the DC-IN on the back of the computer. Sample connecting the AC adapter cord to the computer Connect the power cord/cable to a live electrical outlet. The AC power indicator glows when the computer is connected to an external power source.
Page 53: Charging The Main Battery
Charging the main battery To charge the main battery, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on. For more information on battery use, see “Running the computer on battery power”...
Page 54: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time Opening the display panel Slide the display latch to the right and lift the display panel Sample opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily.
Page 55: Your Computer's Features And Specifications
Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 56: Using The Touchpad
Getting Started Using the TouchPad™ Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you would like to move the cursor: ❖...
Page 57: Using The Scroll Button
Using the Scroll button For applicable systems, the scroll button, located between the primary and secondary control buttons on the TouchPad, is used for rapid viewing of pages on the screen. Using the Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button.
Page 58: Installing Additional Memory (Optional)
Toshiba Web site at accessories.toshiba.com). There are two memory slots. Your system may have both slots occupied.
Page 59 Installing additional memory (optional) You need a standard Phillips no. 1 screwdriver to install a memory module. To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. The computer has two memory module slots—Slot A and Slot B.
Page 60 Getting Started Installing additional memory (optional) Using a standard Phillips no. 1 screwdriver, unscrew the screw that secures the expansion memory module slot cover, then remove the expansion memory module slot cover. Sample removing the expansion module memory slot cover Put the screw and cover in a safe place so that you can retrieve them later.
Page 61 Installing additional memory (optional) Gently put the memory module connector down at an angle and press down until the clips snap into place. Do not force the memory module into position. The memory module should be level when secured in place. Sample inserting the memory module Avoid touching the connectors on the memory module or on the computer.
Page 62: Removing A Memory Module
Getting Started Installing additional memory (optional) Removing a memory module Follow steps (optional)” on page Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Standby mode.
Page 63: Checking Total Memory
Gently pull the memory module diagonally to pull it out of the slot. Complete the procedure by following steps “Installing additional memory (optional)” on page Checking total memory When you add or remove memory, you can check that the computer has recognized the change. To do this: Click Start, then click Control Panel.
Page 64: Connecting A Local Printer
Getting Started Connecting a local printer Connecting a local printer Before you can connect a printer, you need a suitable USB printer cable, which may have been provided with your printer. Otherwise, you can purchase one from a computer or electronics store.
Page 65: Setting Up Your Printer
To connect a USB printer: Plug the USB connector into one of the USB ports on your computer Plug the printer’s power cable into a live AC outlet. Connecting a Parallel Printer To connect a parallel printer: Connecting the parallel printer cable while the computer is on may damage the printer, the computer, or both.
Page 66 Getting Started Setting up your printer Using the Add Printer Wizard To set up a printer with the Add Printer Wizard: Click Start, Control Panel, then Printers and Other Hardware. Select Printers and Faxes. The Printers and Faxes window appears. Sample Printers and Faxes window Click Add Printer.
Page 67 Sample Add Printer Wizard Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. If the printer you are setting up: ❖...
Page 68 Getting Started Setting up your printer From the list of manufacturers and printers, select your printer, then click Next. Select the port settings according to the instructions in your printer’s documentation and the port to which your printer is connected, then click Next. The Add Printer Wizard prompts you to enter a printer name.
Page 69: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. Sample optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the USB ports.
Page 70: Connecting External Display Devices
Getting Started Connecting external display devices Connecting external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: ❖ An external monitor or projector via the RGB (monitor) port.
Page 71: Directing The Display Output When You Turn On The Computer
To connect the device: Connect one end of the video cable to the external video device. Refer to the documentation provided with the device for the location of its video-in port. Connect the other end of the video cable to the S-video port on the back of the computer.
Page 72: Adjusting The Quality Of The External Display
Getting Started Connecting external display devices ❖ ❖ TV and LCD Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, then Control Panel and clicking Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, click Apply or OK.
Page 73: Turning Off The Computer
Turning off the computer It is a good idea to turn off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.
Page 74: Closing The Display Panel
Cleaning the computer To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille, and other openings.
Page 75: Moving The Computer
You can purchase a carrying case from your Toshiba dealer (To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com).
Page 76 Getting Started Caring for your computer Insert the cable’s locking end into the security lock slot, then rotate the key a quarter turn and remove it. The computer is now securely locked to deter computer theft. Sample locking the computer...
Page 77: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 78 Learning the Basics Computing tips ❖ Back up your files to storage media on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 79: Using The Keyboard
Using the keyboard Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase l (el) and the number 1 are not interchangeable.
Page 80: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys Ctrl Ctrl, Fn and Alt keys , and Ctrl program you are using. For more information, see your program documentation. Function keys The function keys (not to be confused with the 12 keys at the top of the keyboard.
Page 81: Overlay Keys
Overlay keys Keyboard overlay keys The keys with numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the ten-key keypad on a desktop computer’s keyboard. Using the numeric keypad overlay The keys with the numbers on their right front are the numeric overlay keys.
Page 82 Learning the Basics Using the keyboard To use the cursor control overlay when the numeric overlay is on, press and hold down keys. To return to the numeric overlay, release To turn off the numeric keypad overlay, hold down the and press indicator panel goes out.
Page 83: Starting A Program
Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows Explorer. If you prefer to open the program first, you have four options: ❖...
Page 84: Starting A Program From Windows Explorer
Learning the Basics Starting a program Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.
Page 85: Starting A Program From The Run Dialog Box
Starting a program from the Run dialog box This example uses the Run command to start WordPad: Click Start, then click Run. The Run dialog box appears. Sample Run dialog box In the Run dialog box: ❖ If you know the program’s location, type the command line.
Page 86: Saving Your Work
Learning the Basics Saving your work Saving your work Before you turn off the computer, save your work to the hard disk drive. Always save your data even when you are using the Stand by. If your battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low, see Saving files...
Page 87: File Names
Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name. ® The Windows XP operating system supports file names of up to 255 characters;...
Page 88: Printing Your Work
Learning the Basics Printing your work To save: ❖ A file you are updating, open the program’s File menu and click Save. ❖ A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 89: Backing Up Your Files
Backing up your files Backing up your files means copying individual files to media, such as CDs, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a writable CD-ROM drive or DVD- ROM multi-function drive, you may back up file to a writable disc as follows: To back up to a CD or other media, insert the media into...
Page 90: Using The Dvd-Rom Or Multi-Function Drive
Learning the Basics Using the DVD-ROM or multi-function drive Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform.
Page 91: Dvd-Rom Or Multi-Function Drive Components
Using the DVD-ROM or multi-function drive DVD-ROM or multi-function drive components Your DVD-ROM or multi-function drive may look like this: Eject button Manual eject hole Sample DVD-ROM or multi-function drive Never press the eject button or turn off the computer while the drive-in-use indicator light is glowing.
Page 92: Cd/Dvd Control And Music Cd Buttons
Learning the Basics Using the DVD-ROM or multi-function drive CD/DVD control and Music CD buttons The control buttons to the left of the keyboard let you to play audio CDs when the computer is off. You can also use them to play CDs and DVDs when the computer is on.
Page 93: Inserting A Disc
Using the DVD-ROM or multi-function drive The next track button skips to the following track on the disc. The previous track button returns to the preceding track on the disc. Inserting a disc Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears.
Page 94 Learning the Basics Using the DVD-ROM or multi-function drive Sample inserting a disc Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction. Gently press the center of the disc onto the spindle until it locks into place.
Page 95: Playing An Audio Cd
Using the DVD-ROM or multi-function drive Close the disc tray by pressing gently on the center of the tray until it clicks indicating that it is locked. Playing an audio CD Insert an audio CD and close the disc tray. The computer automatically detects a disc in the drive and opens the Audio CD window.
Page 96 Learning the Basics Using the DVD-ROM or multi-function drive Rewind Play Stop Previous track Next track Mute Sample Windows Media The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button on the CD Player control panel.
Page 97: Playing Cds Using Auto-Run
Using the DVD-ROM or multi-function drive Playing CDs using Auto-Run If you insert a CD into the DVD-ROM/multi-function drive and the Auto-Run feature does not automatically start your disk, try launching the CD manually. To do this, follow these steps: Open the Start menu and select My Computer.
Page 98: Viewing The Contents Of A Cd Or Dvd
Learning the Basics Using the DVD-ROM or multi-function drive Viewing the contents of a CD or DVD CDs and DVDs contain files just like the hard disk. CDs are often used to install software or store files that require lots of space, such as photographs and large presentation files.
Page 99: Removing A Disc With The Computer Off
Using the DVD-ROM or multi-function drive Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 100: Powering Down The Computer
Learning the Basics Powering down the computer Powering down the computer Pushing the power button before shutting down the Windows operating system could cause you to lose your work. Make sure the system indicator panel’s disk light and the drive-in- use light are off.
Page 101: Shutting Down More Quickly
You can also turn off the computer by pressing the power button or closing the display panel. To use either of these methods, you first need to turn on the feature in the Toshiba Power Management Utility. Learning the Basics Powering down the computer ®...
Page 102 Learning the Basics Powering down the computer Click Start, Control Panel, then Performance and Maintenance. Click the Toshiba Power Management icon. The Power Options Properties dialog box appears. Click the Advanced tab, and select the options you want. ❖ When I close the lid of my portable computer Set this option to Power Off to have the computer shut down when you close the display panel.
Page 103: Using Hibernation Mode
Using Hibernation Mode The Hibernation command shuts the computer down completely, but it first saves the current state of the computer to the hard disk. Since Hibernation mode does not require power to maintain the saved information, the system settings are retained indefinitely.
Page 104: Using Hibernation
Powering down the computer Configuring your computer for Hibernation Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Management icon. Click the Setup Action tab. Select Hibernation for the options you want. ❖ When I press the power button Set this option to Hibernate so that the computer will go into Hibernation mode when you press the power button.
Page 105 Click Start, Control Panel, then Performance and Maintenance. Click the Toshiba Power Management icon. Click the Advanced tab, and select the options you want. ❖ When I press the power button Set this option to Hibernation for the computer to go into Hibernation mode when you press the power button.
Page 106: Starting Again From Hibernation Mode
Learning the Basics Powering down the computer Sample Toshiba Power Management Advanced tab Click Apply. Click OK, then close the Control Panel. Starting again from Hibernation mode To start the computer from Hibernation mode, press and release the power button. The computer returns to the screen you were using.
Page 107: Using Standby Mode
Using Standby Mode Standby mode places the computer into a power-saving mode. Standby holds the current state of the computer in memory so that, when you restart the computer, you can continue working from where you left off. Factors to consider when choosing Standby: ❖...
Page 108: Using Standby
Learning the Basics Powering down the computer If you hold down the Shift key, Stand By becomes Hibernate in NOTE the Turn off computer dialog box. To enter hibernation mode, you must hold down the Shift key while you select Hibernate. The computer saves the status of all open programs and files, turns off the display, and enters into a low-power mode.
Page 109 To use any of these methods, you first need to enable them in Toshiba’s Power Management utility. Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Management icon. Click the Setup Action tab. Select Stand by for the options you want. ❖...
Page 110: Toshiba's Online Resources
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 111: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 112: Battery Notice
Toshiba Web site at accessories.toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged.
Page 113: Using Additional Batteries
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries If you spend a lot of time traveling and need to work for many hours without an AC power source, you may want to carry additional charged batteries with you.
Page 114: Charging The Main Battery
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Charging the main battery To charge the battery, plug the computer into a live wall outlet.
Page 115: Charging The Rtc Battery
Leave the power connected, and the battery should begin charging after a few minutes. HINT: Once the battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely. Doing this extends battery life and helps ensure accurate monitoring of battery capacity.
Page 116: Monitoring Battery Power
Mobile Computing Monitoring battery power It is seldom necessary to charge the RTC battery because it NOTE charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.
Page 117: Determining Remaining Battery Power
The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge. Click the Battery Power Meter tab. Sample Toshiba Power Management Battery Power Meter tab Mobile Computing Monitoring battery power...
Page 118: What To Do When The Battery Runs Low
Mobile Computing Monitoring battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 119: Conserving Battery Power
To set an alarm: Click Start, Control Panel, then Performance and Maintenance. Click the Toshiba Power Management icon. Click the Alarm tab and set the alarm, as desired. Sample Toshiba Power Management Alarm tab Conserving battery power...
Page 120: Power Profiles In Windows Xp
By using them, you can greatly increase the length of time you can use the computer before you need to recharge the battery. Toshiba has combined these options into preset power usage modes. Power profiles in Windows XP...
Page 121: Using A Hot Key To Set The Power Profile
Using a hot key to set the power profile You may use a hot key to set the power profile. To set the power profile: Press pop-up window. Sample Power Profile mode pop-up window While continuing to press desired power profile. The power profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life.
Page 122: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery When your battery power is running low, you have two options—connect the computer to an AC power source or install a charged battery. When handling a battery, be careful not to drop it or short- circuit its terminals.
Page 123 Sample unlocking the battery Push and hold the battery release latch. Sample releasing the battery While still holding the release latch in the open position gently lift the battery pack out of the computer. Mobile Computing Changing the main battery...
Page 124: Inserting The Battery Into The Computer
Mobile Computing Changing the main battery Sample removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Inserting the battery into the computer Assuming you just removed the battery pack (see the battery from the computer”...
Page 125: Taking Care Of Your Battery
The battery pack has been designed so that you cannot install it with reverse polarity. Sample inserting battery When you replace your battery, slide the battery lock towards NOTE you to lock the battery pack. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
Page 126: Maximizing Battery Life
Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through accessories.toshiba.com. ❖ Reverse Polarity should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity.
Page 127: Disposing Of Used Batteries Safely
Putting spent batteries in the trash is not only irresponsible, it may be illegal. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. Mobile Computing Disposing of used batteries safely...
Page 128: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 129: Chapter 4: Exploring Your Options
Chapter 4 Exploring Your Options In this chapter, you will explore other features of your notebook computer. In this chapter, you will explore some of the special features of your Satellite Exploring the desktop The desktop is the launching pad for everything you can do in the Windows system.
Page 130: Finding Your Way Around The Desktop
Exploring Your Options Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button Sample Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 131 Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help.
Page 132: System Tray
Exploring Your Options Exploring the desktop Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 133: Setting Up For Communications
Internet To stay current on the most recent software and hardware NOTE options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com. Exploring Your Options Setting up for communications...
Page 134 Exploring Your Options Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 135: Connecting The Modem To A Telephone Line
Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line. Plug one end of a telephone cable (purchased separately) into the modem port on the back of the computer.
Page 136: Connecting Your Computer To A Network
Exploring Your Options Setting up for communications Now you are ready to send a fax or use the modem to connect to an online service or the Internet. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.
Page 137 To avoid this delay, you can reconfigure Windows to disable the LAN port. TECHNICAL NOTE: You can also use ConfigFree to reconfigure Windows to disable the LAN port. For procedures, “Using ConfigFree™ with your Toshiba Computer” on page 195. To disable the LAN port: Click Start, click Control Panel, then Performance and Maintenance.
Page 138 Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. For systems equipped with Wi-Fi, flip the wireless on/off switch to the On position.
Page 139: An Overview Of Using The Internet
An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖ Internet Service Providers ❖ Connecting to the Internet ❖...
Page 140: Internet Service Providers
Exploring Your Options An overview of using the Internet Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Page 141: Surfing The Internet
Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet.
Page 142: Uploading And Downloading Files From The Internet
Exploring Your Options Exploring video features ❖ Online shopping Many Web sites offer products and services for sale. Uploading and downloading files from the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 143: Changing The Display Properties Setting
Changing the display properties setting Right-click anywhere on your desktop and select Properties. The Display Properties dialog box appears. Sample Display Properties dialog box Click the Settings tab. Slide the Screen area slider bar toward Less until the setting reads 800 x 600, then click Apply. The screen blinks momentarily while the settings are adjusted.
Page 144: Exploring Audio Features
Exploring Your Options Exploring audio features Exploring audio features You can use your computer to record sounds using an external microphone. You can play .wav sound files or audio CDs using the built-in speakers, headphones or external speakers. Recording sounds You can make audio recordings and save them as .wav files by connecting an external microphone or other sound source to the microphone jack and using the Sound Recorder feature...
Page 145: Adjusting Recording Settings
Positioning Sample Sound Recorder screen Click the Record button and speak normally into the microphone. You can only record 60 seconds at a time. NOTE When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu.
Page 146: Using External Speakers Or Headphones
Exploring Your Options Using the i.LINK Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
Page 147: Using Pc Cards
Using PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard. Your computer has one PC Card slot and supports Type II PC Cards.
Page 148: Removing A Pc Card
Exploring Your Options Using PC Cards You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the Safe to Remove Hardware message appears, it is safe to remove the PC Card. Align the card connectors with an available PC Card slot and carefully slide the card into the slot until it locks into place.
Page 149: Hot Swapping
Sample removing a PC Card Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use.
Page 150: Using The Bridge Media Slot
Exploring Your Options Using the Bridge Media slot Using the Bridge Media slot Your computer is equipped with a Bridge Media Slot, which supports the use of Memory Stick or Memory Stick PRO media, Secure Digital xD-Picture Cards. This media can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc.
Page 151: Removing Memory Stick Or Memory Stick Pro Media
Removing Memory Stick or Memory Stick PRO media Right-click the Safely Remove Hardware icon on the System tray. After the media is stopped, it is safe to remove. Grasp the card and pull it straight out. ™ Inserting an SD Turn the card so that the contacts (metal areas) are face down.
Page 152: Removing An Sd Card
Exploring Your Options Using the Bridge Media slot Removing an SD Right-click the Safely Remove Hardware icon on the System tray. After the card is stopped, it is safe to remove. Grasp the card and pull it straight out. Inserting an xD-Picture Card Turn the card so that the contacts (metal areas) are face down.
Page 153: Removing An Xd-Picture Card
Removing an xD-Picture Card Right-click the Safely Remove Hardware icon on the System tray. After the card is stopped, it is safe to remove. Grasp the card and pull it straight out. Inserting a SmartMedia Card Turn the card so that the contacts (metal areas) are face down. Push the card into the slot until it locks in place.
Page 154: Removing A Smartmedia Card
Exploring Your Options Using the Bridge Media slot Removing a SmartMedia Card Right-click the Safely Remove Hardware icon on the System tray. After the card is stopped, it is safe to remove. Grasp the card and pull it straight out. ™...
Page 155: Chapter 5: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 156 If Something Goes Wrong Problems that are easy to fix The Windows Task Manager appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Sample Windows Task Manager Applications tab Select the program you want to close, then click End Task.
Page 157 Sample Windows Task Manager Shutdown menu, Turn Off option The computer shuts down. Your program performs an illegal operation. If you receive the message, “ ,” you should record the details of the message and operation consult the software manufacturer. To record the details: Click the Details button and select the text the operating system displays.
Page 158: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start.
Page 159: The Windows Operating System Is Not Working
The Windows The Windows working Once you are familiar with the desktop and used to the way the operating system responds to your work routine, you can easily detect if the operating system is not working correctly. For example: ❖ The operating system fails to start after the Windows XP ❖...
Page 160: Internet Problems
If Something Goes Wrong The Windows ❖ Safe Mode (with Command Prompt) ❖ Enable Boot Logging ❖ Enable VGA Mode ❖ Last known good configuration (your most recent settings that worked) ❖ Directory services restore mode (Windows controllers only) ❖ Debugging Mode ❖...
Page 161: The Windows Xp Operating System Can Help You
and the syntax of the address carefully. A single incorrect letter or missed character, comma instead of period (“dot”) or other mistake makes it impossible for your browser to locate the site. My browser cannot find a site I bookmarked. The World Wide Web is constantly changing.
Page 162: A Plan Of Action
If Something Goes Wrong Resolving a hardware conflict A list of category links appear. Click the Fixing a hardware problem or other appropriate link. Choose from specific topics and follow the steps. If there is still a problem, the operating system should display a message that explains what the conflict is.
Page 163 Direct Memory Access Similarly, the data required by the device is stored in a specific place or address in memory called the Direct Memory Access (DMA). The DMA provides a dedicated channel for adapter cards to bypass the microprocessor and access memory directly.
Page 164: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
Page 165 Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties: Click Start.
Page 166: Memory Problems
TECHICAL NOTE: You must have a least one memory module installed for the computer to work. Toshiba recommends using only memory modules approved NOTE by Toshiba. Power and the batteries...
Page 167 Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adapter and power cord/cable. Make sure the AC adapter and power cord/cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 168: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict Check the power options using the Toshiba Power Management Utility. Have you added a device, such as a PC Card or memory module, that takes its power from the battery? Is your software using the hard disk more? Is the...
Page 169: Display Problems
Display problems Here are some typical display problems and their solutions: The display is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing password, press the If no password is registered, press and allows you to continue working.
Page 170 If Something Goes Wrong Resolving a hardware conflict The built-in screen flickers. Some flickering is a normal result of the way the screen produces colors. To reduce the amount of flickering, try using fewer colors. To change the number of colors displayed: Point at the desktop and click with the secondary button.
Page 171: Disk Drive Problems
Small bright dots appear on your TFT display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. The small bright dots that appear on your display are an intrinsic characteristic of the TFT manufacturing technology.
Page 172 If Something Goes Wrong Resolving a hardware conflict The drive’s properties box appears. Click on Properties. Click the Tools tab. Click the Check now button. The Check Disk box appears (for example, Check Disk C). You can choose one or both options: ❖...
Page 173: Dvd-Rom Or Multi-Function Drive Problems
DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean.
Page 174: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict The color of the materials used to make the disc can affect its reliability. Silver-colored CD-ROMs are the most reliable, followed by gold-colored CD-ROM. Green-colored CD- ROMs are the least reliable. Sound system problems You do not hear any sound from the computer.
Page 175 Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS). Sometimes the CIS contains enough information for you to use the card immediately.
Page 176 If Something Goes Wrong Resolving a hardware conflict Resolving PC Card problems Here are some common problems and their solutions: The slots appear to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start.
Page 177 Click Stop xxxx, where xxxx is the identifier for your PC Card. The operating system displays a message that you may safely remove the card. Remove the card from the slot. Never swap modules when the computer is in Hibernation or Standby mode.
Page 178: Printer Problems
If Something Goes Wrong Resolving a hardware conflict Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper.
Page 179: Modem Problems
Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack. Check the port settings to make sure the hardware and software are referring to the same COM port.
Page 180 If Something Goes Wrong Develop good computing habits On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ Copy files to a CD or other media, following the steps in “Saving your work”...
Page 181: If You Need Further Assistance
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. If Something Goes Wrong If you need further assistance ®...
Page 182: Contacting Toshiba
Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. You can access Toshiba on the Internet using any Internet browser by typing Toshiba voice contact Before calling Toshiba, make sure you have: ❖...
Page 183: Other Toshiba Internet Web Sites
Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia France Toshiba Systèmes (France) S.A. 7, Rue Ampère; B. P. 131 92800 Puteaux Cédex...
Page 184 Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec.
Page 185: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 186: Instant Password Security
Hot Keys Instant password security Instant password security Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 187: Maintaining Security When The Battery Is Not Fully Charged
Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time. To protect your desktop, you must set up a screen saver with a password before activating the password feature.
Page 188: Power Usage Mode
Long Life, Normal, and High Power; DVD Playback, Presentation and Super Long Life The power usage mode in the Windows system under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. Sample power usage modes ®...
Page 189: Stand By Mode
Stand by mode This hot key puts the computer into Stand by mode. ❖ A message box is displayed by default to confirm that the computer is going into Stand by mode. This message box can be set so it doesn’t display. Sample Stand by confirmation box ❖...
Page 190: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key puts the computer into Hibernation mode. ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it doesn’t display.
Page 191: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. ❖...
Page 192: Enabling A Wireless Device
Hot Keys Enabling a wireless device Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer. The wireless mode is: Wi-Fi enabled—This enables the Wi-Fi antenna Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. To use the TouchPad, see TouchPad”...
Page 193: Keyboard Hot Keys
Keyboard hot keys and off. off. off. For more information, see This hot key turns the cursor control overlay on This hot key turns the numeric overlay on and This hot key turns the scroll lock feature on and “Overlay keys” on page Hot Keys Keyboard hot keys...
Page 194: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 195: Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 196: Getting Started
Networking, ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the Toshiba Console button (if applicable to your system) to open the Toshiba Console, and then click the ConfigFree icon. ❖ Click the ConfigFree icon click the desired utility. If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.”...
Page 197: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer Sample ConfigFree Launcher ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 198 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address. A wireless network device also shows information such as the network SSID and the device’s Wired Equivalent Privacy (WEP) key...
Page 199 Using ConfigFree™ with your Toshiba Computer If a problem, or potential problem, is detected, a triangle containing an exclamation point appears in the Connectivity Doctor screen and an orange frame describes the relevant location. You can then view a possible cause and solution for the problem by clicking the exclamation point.
Page 200: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN devices and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map.
Page 201 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices The following screen shows an example of Bluetooth devices that are detected. As with the Wi-Fi screen, moving the mouse pointer over a device icon displays information about the device.
Page 202: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click your own computer at the center of the map. Configured devices are automatically connected. Devices not yet configured launch the Add New Connection Wizard, where you can configure and connect to the device.
Page 203 Using ConfigFree™ with your Toshiba Computer ❖ Personal firewall settings for Internet connections. ❖ Dial-up connection settings for the default connection. ❖ File and printer sharing settings. ❖ Printer settings for the default printer. To create a profile: Click the icon in the system tray.
Page 204: Quick Connect
Quick Connect The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector. Once the projector utility is installed, launching the Quick Connect utility automatically opens the Wireless Data Projector Application.
Page 205 (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 206 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 207: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 208: Semi-Automatic Switch Feature
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears.
Page 209: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 210 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI NTFS direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 211 PCMCIA SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 212 Glossary alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type.
Page 213 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed —...
Page 214 Glossary compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured).
Page 215 disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk —...
Page 216 Glossary DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation — A technique in which a device or program imitates another device or program.
Page 217 — The physical components of a computer system. Compare software. Hibernate — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 218 Glossary interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device — See device. Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services.
Page 219 megabyte (MB) — A unit of data equal to 1,048,576 bytes (1024 x 1024 bytes). See also bytes. memory — Typically refers to the computer’s main memory, where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM.
Page 220 Glossary NT file system (NTFS) — An advanced file system designed for use specifically with the Windows NT operating system. online — Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet.
Page 221 processor — See central processing unit (CPU). program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties —...
Page 222 Glossary ROM (read-only memory) — Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up.
Page 223 universal serial bus (USB) 2.0— A serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all- purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial.
Page 224: Index
Index AC power light 52 audio features 144 Auto-Run 97 avoiding injury 41 battery caring for 125 changing 122 charge not lasting 167 charging 73 conserving power 119 disposal 127 installing 122 light 52 not charging 167 power usage hot key 121 power usage mode 188 removing 122 Bridge Media slot 150...
Page 225 CD or DVDs 99 computer 74 click 57 comfort chair 43 lighting 43 work habits 44 commands powering down 100 communications network connection 136 system resources 162 compact discs inserting 93 problem solving 173 removing 98 computer cleaning 74 lock 75 moving 75 non-system disk or disk error message 158...
Page 226 external monitor not working latch 54 screen is blank 169 display device external 70 display output settings 71 display panel closing 74 opening 54 Display settings hot key 143 display, external adjusting 72 disposal information 27 disposing of used batteries 127 DMA (Direct Memory Access) 163 double-click 57 DVD-ROM or multi-function drive...
Page 227 resolving 163 Help 161 Hibernate restarting 106 using 104 Hibernation mode 73 configuring 104 hot key display modes 191 display settings 143 power usage mode 188 Stand by mode 189 volume mute 185 wireless mode 192 hot key power usage mode 121 hot keys instant password 186 keyboard functions 193...
Page 228 main battery changing 122 removing 122 memory expansion slots 59 problem solving 166 removing 62 removing expansion slot cover memory module inserting 60 removing 63 Memory Stick inserting 150 removing 151 modem determining COM port 134 problem solving 179 resetting port to default settings upgrading 134 module Wi-Fi Mini PC 138...
Page 229 173 computer hangs when PC Card inserted 176 computer will not power up 158 contacting Toshiba 181 corrupted/damaged data files Device Manager 164 disabling a device 164 disk drive is slow 172 display is blank 169...
Page 230 URL address not found 161 using Startup options 159 warning resume failure 158 Windows XP not working 159 programs not running correctly 172 starting 83 projector 70 connecting 70 protection of stored data 2 recharging main battery 113 recording adjusting quality 145 sounds 144 Recovery media 38 recycle bin icon 131...
Page 231 72 video-out S-video 70 volume mute hot key 185 warranty limited warranty 39 Web sites 182 Web sites,Toshiba 183 Wi-Fi wireless networking 136 Wi-Fi Mini PCI modules 138 Windows Explorer 84 Windows Media Player 95 Windows Standby 73...

Toshiba M30X-S171ST User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Options

Chapter 5: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba M30X-S171ST

Summary of Contents for Toshiba M30X-S171ST