Toshiba SATELLITE M30-35 Series Maintenance Manual page 265

4.29 Fluorescent Lamp
4.29.2 Replacing the 15.4-inch WXGA LG.Philips Fluorescent Lamp
Disassembly of outside tape / Cover shield
To disassemble the 15.4-inch WXGA LG.Philips fluorescent lamp, follow the steps below
and refer to figures 4-62 to 4-65.
1. Disassembly of Tape adhesive used for B/L Wire fixing
CAUTION: Pressure or stress should not be given on B/L Wire.
2. Disassembly of Tape adhesive used for B/L Wire fixing
CAUTION: Pressure or stress should not be given on Gate COF.
3. Disassembly of Cover shield (S)
CAUTION: Pressure or stress should not be given on Source PCB. Usage of gloves
with anti-electric discharge coating is recommended, to eliminate possible damage
on circuits occurred by ESC.
4. Disassembly of Tape shield and Tape Adhesive used for Top case fixing
CAUTION: Pressure or stress should not be given on Top case during this process.
Figure 4-62 Replacing LG.Philips fluorescent lamp (WXGA) (1)
Satellite M30-35 Maintenance Manual (960-455)
4 Replacement Procedure
4-89