4.23 RGB board/Power board
4. Remove the following screws and power board.
• M2.5×6
Wireless LAN cable (white)
Wireless LAN cable (black)
5. Disconnect the wireless LAN cables from the connectors CN6 (white) and CN8
(black) on the power board.
6. Disconnect the battery cable from the connector CN4 on the power board.
Satellite M30-35 Maintenance Manual (960-455)
Tapping screw
M2.5×6 Tapping
Figure 4-37 Removing the power board
4 Replacement Procedures
×2
Battery cable
4-59