Location And Function Of Mechanical Controls; Master Switch - Craftsman 113.290650 Owner's Manual

LOCATION AND FUNCTION OF MECHANICAL CONTROLS
10. SAWBLADE
11. EXACT-I-CUT
MITER GAUGE \ 9. TABLE
LOCK HANDLE \ INSERT
7, MITER GAUGE
8. BLADE GUARD
ANTIKICKBACK PAWLS
6. RIP FENCE
HOLES FOR
ATTACHING
WOODEN FACING
RIP FENCE
LOC
ELECTRONIC CONTROLS
CAUTION: Before turning switch on, make sure the
blade guard is correctly installed and operating
properly.
1. MASTER SWITCH:
This is the power on-off switch for the
computer's display and keyboard functions.
(The computer's memory has constant power as
long as saw is plugged into a 120v live power
supply.) Turning this switch off will shut off
power to the saw motor as well as the computer
functions.
2. Insert finger under bottom of lever and pull
out.
To turn switch off:
Push lever in.
To turn switch on:
1. Insert yellow key.
To lock switch:
Hold lever in with one hand while removing
yellow key with the other hand.
23