Location And Function Of The Electronic Indicator System; Digital Readout Display; Bttery Cover; Function Keys - Craftsman 113.247440 Owner's Manual

12-inch electronic band saw
Table of Contents

Advertisement

Rocation and function of the electronic indicator system
BATTERY
COVER
RELEASE
SLOTS
A
OPEN
BATTERY
OPEN
A
BATTERY
COVER
KEY
ELECTRONIC
MEASUREMENT
BEVEL ANGLE KEY
NSION
KEY
SPEED
KEY {FT.
PER
MIN_)
DIGITAL
READOUT
DISPLAY
DIGITAL
READOUT
DISPLAY
The Liquid Crystal
Display,
or LCD, on this saw
gives the user the ability to accurately
position
the
blade and monitor
the set-up
The three functions
displayed
are:
Bevel Angle - Shows the present angle of the blade
to the table The
_
keyisusedtosetthezero
degree point
Blade Tension - Displays the blade size for which the
tension has been adjusted.
Blade Speed - Displays
the speed of the blade in
surface feet per minute (FPM)
NOTE: The function
being displayed is indicated
by
an abbreviated
name of the function
in the left hand
area of the display; either BEV, TEN, or FPM
BATTERY
COVER
The Battery Cover covers the battery compartment
To.release
the cover, insert a small coin into one of
the release slots and twist
Remove the cover
1 Installing
the Battery
The battery is supplied with the loose parts It is a
6-volt, type J alkaline
battery. Install the battery
with the contact
end down and the "+" terminal
towards the left Push the battery down and back
until the top edge of the battery is caught under
the ribs in the compartment
Do not force the
battery
It if doesn't push in easily, remove the
battery and check that it is positioned
correctly.
2.. Reinstall
battery covery by inserting
the tabs on
the lower edge of the cover into the mounting
holes in the control
and pushing
the cover into
position
FUNCTION
KEYS
The five keys located to the right of the display are
the function
keys They are:
_--
Turns the display "On"
"Off"
or
_--
Selects the Bevel Angle display
_--
Selects the Blade Tension display
_--
the Blade Speed display
Selects
_--
Sets the Bevel Angle to Zero
NOTE: In order to extend battery life tha display will
shut off approximately
five (5) minutes after the last
key was pressed
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents