Craftsman 113.290650 Owner's Manual page 36

When "WIDTH OF RIP" is 6 in. and WIDER use your
RIGHT Hand to feed the workpiece until it isclear of
the table.
Use LEFT hand ONLY to guide the
workpiece.., do not FEED the workpiece with,the
left hand.
OR MORE
When "WIDTH OF RIP" is 2in. to 6in. wide USE THE
PUSH STICK to feed the work.
When WIDTH OF RIP is NARROWER than 2 in., the
push stick CANNOT be used because the guard will
interfere... USE the AUXILIARY FENCE/WORK
SUPPORT and PUSH BLOCK.
Attach Auxiliary Fence/Work Support to rip fence
with two "C" clamps.
36