Location And Function Of Controls; On/Off Switch; Miter Lock - Craftsman 113.198111 Operator's Manual

Location and Function of Controls
Fig 24 - Radial Saw Controls
On/Off Switch
The on!off switch turns the power to the saw
on and off.
To turn the saw on, put the yellow key into
the nd switch and then pull the switch to the
right. To turn the saw off, push the md switch
to the left. Remove the yellow key from the
red switch whenever the saw is turned of L and
keep it out of the reach and sight of children.
(Figure 25)
WARNING: The saw can start ac-
cidentally or be used by children and
others when the yellow key is left in the
red switch. Always remove the yellow
key when the saw is off, and keep it out
of the reach and sight of children.
Z&
WARNING: The saw will start im-
mediately when the power comes back
on after a blackout if the red switch is
left on. Always turn the switch off and
remove the yellow key when the power
goes off for any reason.
Miter Lock
The miter lock is used to hold the radial arm
at various angles to the fence.
To unlock the miter lock, pull the lock to the
right. (Figure 26)
Fig. 25 - On/Off Switch
13