Location And Function Of Controls; On/Off Switch; Miter Lock - Craftsman 113.197250 Operator's Manual

Location and Function of Controls
i
) i
iii! i
113.197210
Fig. 45 - Radial Saw Controls
On/Off Switch
The on/off switch turns the power to the saw
on and off.
To turn the saw on, put the yellow key into
the red xwitch and then pull the switch to the
right. To turn the saw off. push the red switch
to the left. Remove the yellow key from the
red switch whenever the saw is turned off,
and keep it out of the reach and sight of
children. (Figure 46)
Fig. 46 - On/Off Switch
113.197250
_1_ WARNING: The saw can start ac-
cidentally or be used by children and
others when the yellow key is left in the
red switch. Always remove the yellow
key when the saw is off, and keep it out
of the reach and sight of children.
WARNING: The saw will start im-
mediately when the power comes back
on after a blackout if the red switch is
left on. Always turn the switch off and
remove the yellow key when the power
goes off for any reason.
Miter Lock
The miter lock is used to hold the radial arm
at various angles to the fence.
To unlock the miter lock, pull the lock to the
right. (Figure 47)
2O