Connecting Line Input Audio Equipment - Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual

For details about attaching the battery pack, see "7-1-
1 Using a Battery Pack" on page 116.
Adjustment screws
Back of camcorder
2
Mount the tuner on the WRR tuner fitting.
3
Connect the tuner power cord to the DC OUT
connector of the camcorder, and the audio output cable
to the AUDIO IN CH1 or CH2 connector.
AUDIO IN CH-1/CH-2 switches:
Set the AUDIO IN CH-1 or CH-2
switch for the channel to which
the audio output cable is
connected to REAR.
124
Audio Input System
Battery Pack
Mount plate (supplied
with WRR-861A/
861B/862A/862B)
Screwdriver
WRR-861A/861B/
862A/862B
Set the LINE / AES/
EBU / MIC switch for
the channel to which
the audio out cable is
attached to MIC, and
set the +48V/OFF
switch to OFF.
to AUDIO IN CH1 or
CH2 connector
to DC OUT connector
7-5-4 Connecting Line Input Audio
Equipment
Connect the audio output connector of the audio
equipment that supplies the line input signal to the AUDIO
IN CH1 or CH2 connector.
AUDIO IN
CH 1 or CH 2
AUDIO IN CH-1/CH-2 switches:
Set the AUDIO IN CH-1 or CH-2 switch
corresponding to the channel to which the
audio equipment is connected to REAR.
Set the LINE / AES/EBU
/ MIC switch for the
channel to which the
audio out cable is
attached to LINE.
Audio equipment