Connecting Line Input Audio Equipment; Tripod Mounting - Sony MSW-970 Operation Manual

7-5-4 Connecting Line Input Audio
Equipment
Connect the audio output connector of the audio
equipment that supplies the line input signal to the AUDIO
IN CH1 or CH2 connector.
AUDIO IN CH-1/CH-2 switches:
When the audio cable is connected to either
the AUDIO IN CH1 or CH2 connector with
REAR XLR AUTO set to ON on the AUDIO-1
page of the MAINTENANCE menu, the signal
input to the AUDIO IN CH1 or CH2 connector
is automatically selected as the signal to be
recorded. This is true regardless of the
AUDIO IN CH-1/CH-2 switch settings. (This is
called XLR connection automatic detection
function.)
When the XLR connection automatic
detection function is set to OFF (factory
setting), set the AUDIO IN CH-1 or CH-2
switch corresponding to the channel to which
the audio equipment is connected to REAR.
124

Tripod Mounting

LINE/MIC/+48 V ON
switch:
Set the LINE/MIC/+48 V
ON switch for the
channel to which the
audio out cable is
attached to LINE.
Audio equipment
AUDIO IN for
CH-1 or CH-2
7-6 Tripod Mounting
You can easily mount and dismount the camcorder on a
tripod by using the VCT-14 tripod adaptor (not supplied).
1
Attach the tripod adaptor to the tripod.
Tripod adaptor
Camera mount
2
Mount the camcorder on the tripod adaptor.
Removing the camcorder from the tripod adaptor
Red button
While pressing the red button against
the lever, move the lever in the direction
indicated by the arrow.
Removing the camcorder from the tripod adapter
Slide the camcorder
forward along the groove in
the adaptor until it clicks.
Lever