Setting The Color Temperature Manually; Specifying An Offset For The Auto White Balance Setting - Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual

5
To end menu operations, turn the MENU ON/OFF
switch to OFF.
5-3-3 Setting the Color Temperature
Manually
You can adjust the value of the white balance manually by
setting the color temperature.
1
Holding down the MENU knob, move the MENU ON/
OFF switch to ON.
The TOP menu appears.
2
Turn the MENU knob to move the
then push the MENU knob.
If this is the first time the PAINT menu has been
displayed, the CONTENTS page appears.
If the menu has been used before, the page accessed
last appears.
3
If the CONTENTS page is displayed, push the MENU
knob once, and turn the MENU knob to move the
mark to WHITE. Then push the MENU knob to
display the WHITE page.
If a different page is displayed, turn the MENU knob
until the WHITE page appears, then push the MENU
knob to select that page.
The current setting of each item appears on the right of
the item.
Item Description
COLOR Sets the color temperature to the
TEMP <A> desired value. Adjust the value while
looking at the real image because
error tends to be bigger for
adjustment of high color temperature.
C TEMP BAL Adjusts the value more precisely
<A> when the color temperature
adjustment through COLOR TEMP is
not satisfactory.
R GAIN <A> Only the value of R GAIN is changed.
B GAIN <A> Only the value of B GAIN is changed.
5600K <A> Provides the same effect when the
5600K filter is used by setting to ON.
4
5
b
mark to PAINT,
6
5-3-4 Specifying an Offset for the
b Auto White Balance Setting
By setting an offset for the value of auto white balance, you
can make the picture warmer or colder.
The OFFSET WHT page of the OPERATION menu
allows you to make this setting.
1
2
3
The above table shows the adjustment of the white
balance of channel A.
Items followed by "<B>" are used to adjust the white
balance of channel B.
Turn the MENU knob to move the
you want to set, then push MENU knob.
b
The mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
Turn the MENU knob to change the setting, then push
the MENU knob.
b
The z mark returns to a
returns to a z mark.
To continue setting other items, repeat steps 4 and 5.
To end the menu operation, set the MENU ON/OFF
switch to OFF.
Holding down the MENU knob, move the MENU ON/
OFF switch from OFF to ON.
The TOP menu appears.
Turn the MENU knob to move the
OPERATION, then push the MENU knob.
If this is the first time the OPERATION menu has been
displayed, the CONTENTS page appears. If the menu
has been used before, the page accessed last appears.
If the CONTENTS page is displayed, push the MENU
knob once, and turn the MENU knob to move the
mark to OFFSET WHT. Then push the MENU knob to
display the OFFSET WHT page.
If a different page is displayed, turn the MENU knob
until the OFFSET WHT page appears, then push the
MENU knob to select that page.
The current setting of each item appears on the right of
the item.
Adjustments and Settings from Menus
b
mark to the item
mark, and the ? mark
b
mark to
b
95