Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual page 97

ASSIGN SW <1> window
ASSIGN SW <2> window
TURBO SW window
Functions to be assigned to the ASSIGN 1 (push-type)
switch and the TURBO GAIN button
Function Description
OFF Disables the switch.
F. MIC Assigns the monaural/stereo switch
MONO/ function when a stereo microphone is
STEREO connected to the MIC IN connector.
PICTURE Assigns the Picture Cache mode ON/
CACHE OFF function.
1)
ON/OFF
TEST OUT Assigns the function for switching
CHARACTER whether or not text is superimposed on
the video signal to be output from the
TEST OUT connector.
MARKER Assigns the ON/OFF function for
displaying all markers.
RE-TAKE Assign the RE-TAKE function that
allows the camcorder to search for the
cut most recently recorded and records
the new cut over it.
ATW Assigns the ON/OFF function of auto-
tracing white balance.
RETURN Assigns the ON/OFF function for
VIDEO displaying the image of the return video
signal on the viewfinder.
LENS RET Assigns the same function as that of
the RET button on the lens.
REC SWITCH Assigns the VTR S/S (start/stop)
function.
Function
TURBO
SWITCH
TELE-FILE
MARK
ZEBRA
5600K
UA01 to
UA10
1) The assigned function is effective only when an optional HKDW-703
is installed.
2) Even if the RETURN VIDEO item is set to "OFF" on the GENLOCK
page of the MAINTENANCE menu, you can use this switch to
display the image of the return video signal on the viewfinder.
3) This does not appear if nothing is assigned in the ASSIGN EDIT
menu.
4) To assign the items to the ASSIGN EDIT menu, use the USER
MENU CUSTOMIZE menu.
Functions to be assigned to the ASSIGN 2 (slide-type)
switch
Function
OFF
F. MIC
MONO/
STEREO
PICTURE
CACHE
ON/OFF
TEST OUT
CHARACTER
MARKER
ZEBRA
UA01 to
UA10
1) The assigned function is effective only when an optional HKDW-703
is installed.
2) This does not appear if nothing is assigned in the ASSIGN EDIT
page.
Note
For functions that are assigned to the ASSIGN 2
(slide-type) switch, you cannot change those settings
using other menus. The function assigned to the
ASSIGN 2 switch takes precedence over the menu
setting.
4
Turn the MENU knob to move the
you want to assign to the assignable switch, then push
2)
the MENU knob.
The setting is executed and the FUNCTION 1 page
appears again.
Description
Assigns the TURBO GAIN function.
Assigns the function to the Tele-File
mark recording button.
Assigns the zebra pattern display
function.
Applies an electrical 5600K filter.
Assigns the items assigned on the
3)
ASSIGN EDIT page.
Content
Disables the switch.
Assigns the monaural/stereo switch
function when a stereo microphone is
connected to the MIC IN connector.
Assigns the Picture Cache mode ON/
OFF function.
1)
Assigns the function for switching
whether or not the characters are mixed
with the video signal to be output from
the TEST OUT connector.
Assigns the ON/OFF function for
displaying all markers.
Assigns the zebra pattern display
function.
Assigns the items assigned in the
2) ASSIGN EDIT page.
Adjustments and Settings from Menus
4)
b
mark to the item
97