2
Adjust the viewfinder to the most convenient position
for viewing by sliding it backward or forward.
3
Tighten the viewfinder front-rear positioning lever and
the LOCK knob.
7-2-2 Adjusting the Viewfinder
Focus and Screen
Adjusting the viewfinder focus
Turn the diopter adjustment ring until the viewfinder
image is sharpest.
Adjusting the viewfinder screen
Adjust the brightness, contrast, and peaking of the
viewfinder screen with the controls shown below:
BRIGHT control
CONTRAST control
PEAKING control
118
Adjusting the Viewfinder
Diopter adjustment ring
7-2-3 Detaching the Viewfinder
1
Point the viewfinder barrel up or down.
2
Loosen the viewfinder left-right positioning ring.
3
Holding the viewfinder stopper up, slide the
viewfinder in the direction indicated by the arrow and
detach it.
4
Remove the viewfinder cable and microphone cable
from the clamps and disconnect them.
Using the viewfinder rotation bracket
By fitting a BKW-401 Viewfinder Rotation Bracket (not
supplied), you can rotate the viewfinder out of the way so
that your right leg does not hit the viewfinder while you are
carrying the camcorder.
For more information, refer to the BKW-401 manual.
Viewfinder stopper