Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual page 65

—AUTO IRIS
The iris setting is locked to OPEN. Adjust the iris
setting manually.
—FLARE correction
The setting of FLARE on the SW STATUS page of
the PAINT menu is locked to OFF, regardless of the
setting.
—AWB
The longer the exposure time, the longer the
automatic white balance adjustment time is.
• The following are characteristics of a CCD. They are not
malfunctions.
—If you select a large number of frames, white speckles
may appear on the CCD.
—When you switch the shutter mode from SS mode to
SLS mode, the picture may blur.
—When you switch the OUTPUT/DCC switch from
BARS to CAM, the picture may blur (only when 50i
format is selected).
—If a larger number of frames is selected in SLS mode
in a high temperature situation, a flicker may appear
on the picture.
—If you switch the GAIN selector position, noise may
appear.
For detailed information, consult your Sony dealer.
Changing the range of choice of shutter
mode and speed settings
You can reduce the time required to select whether you use
the ECS mode and the speed by narrowing the choice of
settings in advance. This can be done by using the SHT
ENABLE page of the OPERATION menu.
Notes
• The SLS mode can be selected only when an optional
HKDW-905R extension board is installed.
• When controlling the camcorder by connecting an
optional Remote Control Unit such as RM-B150/B750,
you can select all shutter speeds and ECS mode
regardless of the setting on the SHT ENABLE page.
MENU knob
1
Set the MENU ON/OFF switch to ON while holding
down the MENU knob.
The TOP menu appears.
MENU ON/OFF switch
2
Turn the MENU knob to move the
OPERATION.
3
Push the MENU knob.
If this is the first time the OPERATION menu has been
displayed, the CONTENTS page of the OPERATION
menu appears.
If the menu has been used before, the page accessed
last appears.
4
If the CONTENTS page is displayed, push the MENU
knob once, and then turn the MENU knob to move the
b
mark to SHT ENABLE, then push the MENU knob
to display the SHT ENABLE page.
If a different page is displayed, turn the MENU knob
until the SHT ENABLE page appears, then push the
MENU knob to select the page.
The current setting of each item appears to the right of
the item.
5
Turn the MENU knob to move the
shutter mode or shutter speed you want, then push the
MENU knob.
b
The mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
6
Turn the MENU knob until ON appears, then push the
MENU knob.
The z mark on the left of the selected item returns to
b
a mark and the ? mark on the left of the setting
returns to a z mark.
To set another mode or speed, return to step 5.
Note that only the shutter speeds set to ON can be
selected with the SHUTTER selector.
7
To end the menu operation, set the MENU ON/OFF
switch to OFF.
b
mark to
b
mark to the
65
Setting the Electronic Shutter