Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual page 86

MENU knob
1
Set the MENU ON/OFF switch to ON while holding
down the MENU knob.
The TOP menu appears.
2
Turn the MENU knob to move the
OPERATION, then push the MENU knob.
If this is the first time the OPERATION menu has been
displayed, the CONTENTS page of the OPERATION
menu appears.
If the menu has been used before, the page accessed
last appears.
3
If the CONTENTS page is displayed, push the MENU
knob once, then turn the MENU knob to move the
mark to '!' LED, then push the MENU knob again to
display the '!' LED page.
If a different page is displayed, turn the MENU knob
until the '!' LED page appears, then push the MENU
knob to select the page.
The current setting of each item appears on the right of
the item.
The following table shows operations under the
condition where '!' LED STD has been pre-adjusted at
the factory.
Item
GAIN
SHUTTER
WHITE BAL
5600K
86
Status Display on the Viewfinder Screen
CANCEL/PRST /
ESCAPE switch
MENU ON/OFF switch
b
mark to
Contents
Lights when the gain is set to
anything but 0 dB.
Lights when the SHUTTER
selector is set to anything but
1/48.
Lights when the WHITE BAL
switch is set to PRST.
Lights when the 5600K mode is
set to ON.
Item
ATW
EXTENDER
FILTER
OVERRIDE
FORMAT
4
Perform the settings for each item.
1 Turn the MENU knob to move
you want to set, then push the MENU knob.
b
The mark on the left of the selected item changes
to a z mark, and the z mark on the left of the
setting changes to a ? mark.
2 Turn the MENU knob to change the setting, then
push the MENU knob.
3 To continue setting other items, repeat steps 1 and
2.
b
You can change the criteria for whether the '!'
indicator lights or does not light on the '!' LED STD
page.
To change the criteria, go to step 5.
If you don't want to change the criteria, go to step 8.
5
b
Move the mark to the page number, then push the
MENU knob. Or when the
of the item, push the CANCEL/PRST / ESCAPE
switch down to ESCAPE.
6
Turn the MENU knob until the '!' LED STD page
appears, then push the MENU knob.
Item
GAIN
SHUTTER
WHITE BAL
Contents
Lights when ATW is being used.
Lights when the lens extender is
used.
Lights when the FILTER selector
is set to anything but ND:1/CC:B.
Lights when the reference value of
the auto iris adjustment is other
than the standard value.
Lights when the frame frequency
is set to other than 23.98PsF.
b
mark to the item
b
mark is located at the left
Description
GAIN switch position L, M, H, or
0 dB
Shutter mode OFF, ECS, SLS
2)
1/33
White balance automatic
adjustment memory, P (PRST), A,
B, PA, PB, or AB
1)
,