Assigning Functions To Assignable Switches - Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual

Item Description
OFFSET Turns the setting of the offset for
WHITE <A> channel A ON or OFF. ON: Adds the
offset adjusted on this page to the
white balance.
WARM-COOL When OFFSET WHITE <A> is ON,
<A> sets the offset for the white balance of
channel A, using the color
temperature. Adjust the value while
looking at the real image because the
error tends to be bigger for
adjustment of high color temperature.
WARM-COOL Adjusts the value more precisely if the
BAL <A> adjustment by WARM-COOL <A> is
not satisfactory.
OFFSET Turns the setting of the offset for
WHITE <B> channel B ON or OFF. ON: Adds the
offset adjusted on this page to the
white balance.
WARM-COOL Sets the offset for the white balance
<B> of channel B, using the color
temperature. Adjust the value while
looking at the real image because the
error tends to be bigger for
adjustment of high color temperature.
WARM-COOL Adjusts the value more precisely if the
BAL <B> adjustment by WARM-COOL <B> is
not satisfactory.
4
Set the WHITE BAL switch to the position
corresponding to the desired channel (A or B).
Note
If the WHITE BAL switch is not set to A or B when
you operate the camcorder, the adjustment value will
not be reflected in the output signal.
5
Turn the MENU knob to move the
you want to set, then push the MENU knob.
b
The mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
6
Turn the MENU knob to change the setting, then push
the MENU knob.
The z mark returns to a
returns to a z mark.
96
Adjustments and Settings from Menus
b
mark to the item
b
mark, and the ? mark
To continue setting other items of the same white
balance channel, repeat steps 5 and 6.
To set the other white balance channel, go back to step
4.
7
To end the menu operation, set the MENU ON/OFF
switch to OFF.
Note
When using the OFFSET WHITE function, "+" is
displayed as the WARM color temperature indication and
"-" is displayed as the COOL temperature indication in the
viewfinder.
5-3-5 Assigning Functions to
Assignable Switches
You can assign the desired function to the ASSIGN 1/2
switches and the TURBO GAIN button.
1
Set the MENU ON/OFF switch to ON.
The menu page accessed last appears on the
viewfinder screen.
2
Turn the MENU knob until the FUNCTION 1 page
appears, then push the MENU knob to select the page.
The current setting of each item appears on the right of
the item.
Item Description
ASSIGN SW <1> Assigns the function to ASSIGN 1
(push-type) switch.
ASSIGN SW <2> Assigns the function to ASSIGN 2
(slide-type) switch.
TURBO SW Assigns the function to the TURBO
GAIN button.
3
Turn the MENU knob to move the
corresponding to the switch to which you want to
assign the function, then push the MENU knob.
The corresponding ASSIGN SW window appears.
b
mark to the item