Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual page 77

This indicates that the
menu screen can be
scrolled downwards.
This indicates that the
menu screen can be
scrolled upwards.
b mark
2 Push the MENU knob.
The selected page is displayed.
Go to step 4.
2
Turn the MENU knob until the desired page appears.
3
Push the MENU knob.
b
A mark appears on the left of the item currently
selected on the page.
4
Turn the MENU knob to move the
desired item.
• Turning the MENU knob counterclockwise as seen
from the front of the camera moves the
continuously.
• Turning the MENU knob clockwise as seen from the
front of the camera moves the
continuously.
5
Push the MENU knob.
b
The mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
The menu display changes to the setting screen where
you can change the settings.
6
Turn the MENU knob to change the setting.
b
mark to the
b
mark up
b
mark down
7
To increase a setting value
Turn the MENU knob counterclockwise as seen from
the front of the camera.
To decrease a setting value
Turn the MENU knob clockwise as seen from the front
of the camera.
When you turn the MENU knob, the setting increases
or decreases one step at a time.
If you turn the knob quickly, the numeric value
changes rapidly. If you turn it slowly, you can make
minor adjustments.
To toggle a setting on or off
Turn the MENU knob clockwise or counterclockwise.
Each turning operation of the knob toggles the ON and
OFF settings.
To cancel the setting/to reset the setting to the initial
setting
You can cancel the setting and reset it to its initial value
(one set at the factory, or a preset value) by pushing the
CANCEL/PRST / ESCAPE switch to CANCEL/
PRST before pushing the MENU knob in step 7.
1 Set the CANCEL/PRST / ESCAPE switch to
CANCEL/PRST.
The message "CANCEL DATA OK?" appears.
2 To cancel the previous setting: Push the
CANCEL/PRST / ESCAPE switch to CANCEL/
PRST.
3 To reset the setting to the initial value: Push the
CANCEL/PRST / ESCAPE switch to CANCEL/
PRST once more. After the message "PRESET
DATA OK?" appears, push the CANCEL/PRST /
ESCAPE switch to CANCEL/PRST again.
The setting is reset to the initial value.
The action of the CANCEL/PRST function differs for
some setting items. Some items are only affected by
PRST. Check the setting procedure for each item for
more information.
To interrupt the settings change operation
By setting the MENU ON/OFF switch to OFF, the
menu disappears from the screen. By setting the
MENU ON/OFF switch to ON again, the values that
were displayed when you interrupted the setting
operations will reappear so you can continue making
settings.
Push the MENU knob.
Menu Organization and Operation
77