Setting The Frame Frequency - Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual

Setting the Frame
Frequency
The factory setting of the frame frequency of the
camcorder is 23.98PsF. To use the camcorder with a format
other than the 23.98PsF format, you should change the
setting of the frame frequency first.
MENU knob
1
Set the POWER switch to ON.
2
Open the switch cover, and then set the MENU ON/
OFF switch to ON while pushing the MENU knob.
The TOP menu appears.
3
Turn the MENU knob to move the
MAINTENANCE, then push the MENU knob.
When the MAINTENANCE menu is used for the first
time, the CONTENTS page appears.
When a question mark
appears at the top left of the
title page, you can switch
pages by turning the MENU
knob
Switch cover
MENU ON/OFF switch
POWER switch
b
mark to
Or, if you have used the MAINTENANCE menu
before, the page that was on the screen when the last
menu operation ended appears.
4
When the CONTENTS page is displayed, push the
MENU knob once, and then turn the MENU knob to
b
move the mark to FORMAT.
Or, turn the MENU knob until the FORMAT page
appears from the CONTENTS page.
When any page of the MAINTENANCE menu is
displayed, turn the MENU knob until the FORMAT
page appears.
5
Push the MENU knob.
The FORMAT page appears.
6
b
Confirm the mark is positioned at NEXT, then push
the MENU knob.
b
The mark to the left of NEXT changes to a z mark,
and the z mark to the left of the setting changes to a ?
mark.
7
Turn the MENU knob clockwise or counterclockwise
until the desired frame frequency appears.
Frame
frequency
currently
selected
9

Setting the Frame Frequency