Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual page 44

To turn on Auto Interval Rec mode, proceed as follows.
MENU knob
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
2
Turn the MENU knob until the FUNCTION 1 page
appears.
When the question mark
appears at the left corner of
the title page, you can
switch the pages.
Turn the MENU knob
clockwise or
counterclockwise to display
the desired page.
3
Push the MENU knob.
b
A mark appears on the left of the currently selected
item and a z mark appears on the left of the setting.
4
Turn the MENU knob to move the
INTVAL REC.
5
Push the MENU knob.
b
The mark on the left of CACHE/INTVAL REC
changes to a z mark and the z mark on the left of the
setting changes to a ? mark.
44
Recording
MENU ON/OFF switch
b
mark to CACHE/
6
Turn the MENU knob until A. INT appears.
As you turn the MENU knob, the setting changes in
the following sequence: OFF y CACHE y A. INT
y M. INT.
When A. INT appears, the camcorder is in Auto
Interval Rec mode. The TALLY indicator (green) in
the viewfinder flashes (one flash/second) while the
camcorder is in this mode. Also, TAKE TOTAL
TIME, REC TIME and PRE-LIGHTING appear.
7
Push the MENU knob.
The z mark on the left of CACHE/INTVAL REC
b
changes to a mark, and the camcorder enters the
item selection mode.
8
Turn the MENU knob to move the
TOTAL TIME.
9
Push the MENU knob.
b
The mark on the left of TAKE TOTAL TIME
changes to a z mark and the z mark on the left of the
setting changes to a ? mark.
10
Turn the MENU knob until the desired setting of
TAKE TOTAL TIME appears.
As you turn the MENU knob, the setting of TAKE
TOTAL TIME changes in the following sequence:
5M y 10M y 15M y 20M y 30M y 40M
y 50M y 1H y 2H y 3H y 4H y 5H y
7H y 10H y 15H y 20H y 30H y 40H y
50H y 70H y 100H.
(M = minutes; H = hours)
11
Push the MENU knob.
The z mark on the left of TAKE TOTAL TIME
b
changes to a mark and the ? mark changes to a z
mark.
b
mark to TAKE