Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual page 153

No. Page Item
M03 LEVEL ADJ Y LEVEL
SYNC LEVEL
Pr LEVEL
Pb LEVEL
OUTPUT SELECT
M04 SD LEVEL SD VBS LEVEL
3)
ADJ
SD VBS SETUP
LVL
M05 BATTERY BEFORE END 1
END 1
BEFORE END 2
END 2
BEFORE END 3
END 3
Settings Default
(–99 to 99) 0
(–99 to 99) 0
(–99 to 99) 0
(–99 to 99) 0
Y/R/G/B Y
1)
(–99 to 99) 0
0% to 7.5% 0%
5/10/15 to 95/100% 5%
(in 5% steps)
0/1/2/3/4/5% 0%
11.0 to 17.0 V 11.3
(in 0.1 V steps)
10.5 to 11.5 V 11.0
(in 0.1 V steps)
11.0 to 17.0 V 11.8
(in 0.1 V steps)
10.5 to 14.0 V 11.0
(in 0.1 V steps)
Description
Adjusts the chrominance level of the output
signal to the TEST OUT connector and to the
viewfinder.
Adjusts the SYNC level of the output signal to
the TEST OUT connector and to the
viewfinder.
Adjusts the Pr level of the output signal to the
TEST OUT connector and to the viewfinder.
Adjusts the Pb level of the output signal to the
TEST OUT connector and to the viewfinder.
Selects the output signal from the TEST OUT
connector, the input signal to the viewfinder,
and the output signal from the VBS/SDI
2)
OUT .
Adjusts the V level of the VBS output signal.
Selects the setup level of the VBS output
4)
signal.
Used when a Sony-made battery pack, such
as a BP-GL65/GL95, is used. Sets the
voltage warning level just before the battery
ends.
Used when a Sony-made battery pack, such
as a BP-GL65/GL95, is used. Sets the
voltage level at which the battery ends and
the camcorder stops operation, just before
the battery ends.
Used when a Sony-made battery pack, such
as a BP-L60S, is used. Sets the voltage
warning level just before the battery ends.
Used when a Sony-made battery pack, such
as BP-L60S, is used. Sets the voltage level at
which the battery ends and the camcorder
stops operation, just before the battery ends.
Used when a battery pack other than a Sony-
made one or an external power connected to
the DC IN connector is used. Sets the voltage
warning level just before the battery ends.
Used when a battery pack other than a Sony-
made one or an external power connected to
the DC IN connector is used. Sets the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
153
Menu List