Warning/Error Messages In Memory Label Operation - Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual

Even if you press the ASSIGN 1 switch when a Tele-File
mark is not displayed, the Tele-File mark set on the menu
will not be displayed.
1
Set the MENU ON/OFF switch to ON while pushing
the MENU knob.
The TOP menu appears.
2
Turn the MENU knob to move the
then push the MENU knob.
When the FILE menu is used for the first time, the
CONTENTS page appears.
Or, if you have used the FILE menu before, the page
that was on the screen when the last menu operation
ended appears.
3
When the CONTENTS page is displayed, push the
MENU knob once, and then turn the MENU knob to
b
move the mark to TELE FILE, then push the MENU
knob again.
When any page of the FILE menu is displayed, turn the
MENU knob until the TELE FILE page appears, then
push the MENU knob.
The TELE FILE page appears.
4
Turn the MENU knob to move the
FILE MARK, then push the MENU knob.
b
The mark to the left of TELE FILE MARK changes
to a z mark, and the z mark to the left of the setting
changes to a ? mark.
5
6
b
mark to FILE,
7
3-4-3 Warning/Error Messages in
Memory Label Operation
When Tele-File marks cannot be recorded correctly or may
not be recorded, warning/error messages appear.
Warning messages
"TELE-FILE MEMORY FULL!"
• You have loaded a cassette with a memory label whose
memory capacity is 0 % attached.
• You have loaded a cassette with a memory label whose
memory capacity is 0 % attached, and you are starting /
stopping the recording.
"TELE-FILE NEAR FULL!"
The remaining capacity of the memory label is about 5 %
b
mark to TELE
or less, but Tele-File marks are still correctly recorded.
Error messages
"NO TELE-FILE!"
A cassette tape without a memory label has been loaded.
"TELE-FILE FULL!"
The remaining capacity of the memory label has reached
0 %.
"TELE-FILE WRITE PROTECT!"
The memory label is write-protected.
Recording the Recording Start Time Code onto the Memory Label — Tele-File
Turn the MENU knob clockwise or counterclockwise
until the desired Tele-File mark appears.
The Tele-File mark changes in the order of OK y
NG y KP...
Setting Contents
OK When the recorded image is good.
NG When the recorded image is not good.
KP When you cannot judge whether the
recorded image is good or not good, or
when you want to record the mark as the
break of multiple shots.
Push the MENU knob.
The z mark to the left of TELE FILE MARK changes
b
to a mark, and the ? mark to the left of the setting
changes to a z mark.
To end menu operation, set the MENU ON/OFF
switch to OFF.
55