Decoding E-Mail Attachment - Furuno FELCOM 16 Operator's Manual

3.10

Decoding E-mail Attachment

When you can't read an e-mail attachment because it has been coded by MIME
(Multipurpose Internet Mail Extensions), you may decode it as below.
1. Save the MIME-coded file to the hard disk. (See paragraph 4.2.5 for the
procedure.) This step is not necessary if Auto Receive Message Save is
turned on in the Auto Mode Setup menu.
2. Press the [F1] key to open the File menu.
3. Press the [9] key to choose MIME(Decode).
4. Press the [↑] or [↓] key to choose the file you want to decode.
5. Press the [Enter] key.
6. Yes is selected; press the [Enter] key to decode the file.
Decode window
File chosen at step 4
MIME Decode
Checking 'E0970715.001' . . .
Decode 'ABC.ini'?
File attachment
Decode window
Save window
3. FILE OPERATIONS
Decode
Yes No
3-19