Furuno FELCOM 16 Operator's Manual page 28

1. OPERATIONAL OVERVIEW
(2) Communication unit status
IDLE
IDLE (PENDING)
SENDING
RECEIVING
LOGIN
LOGOUT
Data Report
TESTING
TEST SETUP
SCANNING
EGC RECEIVER
(Reverse video)
Delivery Status Req.
Forced Clearing
(3a) Communication status
CALLING
WAITING FOR ACKNOWLEDGEMENT Waiting for acknowledgement from
RECEIVING EGC MESSAGE
WAITING FOR BACKOFF
Successful Login.
Login failed.
Successful Logout.
Logout failed.
Successful Forced Clearing.
Forced Clearing Failed.
SENDING MESSAGE PACKETS
WAITING FOR ACKNOWLEDGEMENT Waiting for acknowledgement from LES
Successful sending to LES.
Sending message failed.
Call rejected.
Call pending.
Received Call.
Received Call(ITA2).
RECEIVING MESSAGE PACKETS
CLEARING
Successful receiving.
Receiving failed.
Successful Data Report.
Data Report failure.
PV TEST CALL is rejected.
PV TEST CALL is pending.
TEST-RECEIVING MESSAGE
TEST-SENDING MESSAGE
1-8
Idle (awaiting receiving, awaiting transmitting)
Awaiting reply from LES
Sending
Receiving
Logged in with NCS
Logging out with NCS
Sending data report
PV (Performance Verification) testing
Requesting PV testing
NCS scanning
EGC-only receiver operation
Transmitting delivery status request
Stopping receiving, transmitting, or scanning
Now calling
LES.
Now receiving EGC message
Waiting to transmit data report
Login was successful
Login failed
Logout was successful
Logout failed
Forced clearing successful
Forced clearing unsuccessful
Sending TX message packets
Message successfully sent to LES
Message could not be sent to LES
LES rejected your message
LES temporarily suspending
communications
Call received from LES
Call(ITA2) received from LES
Receiving message packets
Clearing TX sequence
You successfully received message
You could not receive message
Data report successfully sent.
Data report could not be sent.
PV test call rejected by NCS
PV test pending by LES
Receiving test message from LES
Sending test message to LES