Entering Own Ship's Position - Furuno FELCOM 16 Operator's Manual

2. SYSTEM INITIALIZATION
2.8

Entering Own Ship's Position

When the internal GPS navigator is abnormal, manually enter position as below.
1. Press the [F9] key to display the Position menu.
File
LAT
LON
2. Press the [Enter] key to open the latitude entry window.
3. Enter latitude (XX° XX) and then press the [N] or [S] key as appropriate to
enter coordinate.
4. Press the [Enter] key to close the window.
5. Press the [↓] key to choose LON.
6. Press the [Enter] key to open the longitude entry window.
7. Enter longitude (XXX° XX) and then press the [E] or [W] key as appropriate
to enter coordinate.
8. Press the [Enter] key to close the window.
9. Press the [Esc] key to open the update window.
10. Yes is selected; press the [Enter] key to update position and close the Ship
Position menu. The position entered appears at the bottom right corner of the
system status monitor screen.
2-30
Edit Transmit EGC
Ship Position
34:30.00N
135:30.00E
Ship position window
Latitude entry window
Longitude entry window
File Edit Transmit EGC
Ship Position
34:50.00N
LAT
000:00.00E
LON
Update
Yes No
Ship position, update
Reports Logs Options
Ship Position
00:00.00N
LAT
34:30.00N
LON 000:00.00E
Ship Position
LAT 00:00.00N
135:30.00E
000:00.00E
LON
Reports Logs Options
Setup Position StopAlarm
Setup Position StopAlarm