Preparing Files; Preparing A Routine File - Furuno FELCOM 16 Operator's Manual

3. FILE OPERATIONS
3.2

Preparing Files

There are two types of files: routine and confidential. Files can be assigned a file
name and saved to the hard disk for later use. A message may contain
maximum 32 Kbytes of characters.
3.2.1

Preparing a routine file

1. Press the [F1] key to display the File menu.
File
1. New
2. Open
3. Close
4. Save
5. Delete
6. Rename
7. Print
8. Print Setting
9. MIME (Decode)
2. Press the [1] key to choose New. The display should now look something like
the illustration below.
File
0001|
---- * ---------+---------+---------+---------+---------+---------+---------<
TELEX
Note: When two working areas are opened and you try to open a third file,
3. The cursor is on the first line. Type your message.
4. To transmit the message you have just prepared, go to paragraph 4.1.2. To
save it to the hard disk, for future transmission, go to paragraph 3.3.
3-2
Edit Transmit EGC
File
ALT-N
ALT-O
ALT-Q
ALT-S
ALT-D
ALT-P
Edit Transmit EGC
Cursor can be a square or an underline.
1 Char.
the message "Save this message" appears. When this occurs close an
open file to free a working area.
Reports Logs Options
File menu
Reports Logs Options
<[1] UNTITLED1>
[ Line 1/ 1 Col.
Text editor screen
Setup Position StopAlarm
Setup Position StopAlarm
1 ] [Insert ]