Error Messages And Alerts - Furuno FELCOM 16 Operator's Manual

1. OPERATIONAL OVERVIEW
3. Press the [↑] or [↓] key to choose option desired and press the [Enter] key.
4. Press the [Esc] key.
Note 1: On some menus the update window appears after you press the [Esc]
key. This is done to ask you to confirm settings. Yes is selected in the
Update window; press the [Enter] key to register settings, or press [→]
to choose No and press the [Enter] key to escape.
Note 2: The following functions are not available:
Keying Sequence
F3-1
F8-1
F8-4
1.5

Error Messages and Alerts

The terminal unit displays error messages and alerts to call your attention to
misoperation, failed operation and system error. A list of error messages appears
in Chapter 7 and alerts in the Appendix.
To erase an error message or alert, press the [Esc] key.
File
1. Send Message Log
2. Receive Message Log
No. Message File Station
No Message.
1-12
Update
Yes No
Item
Selection of Priority on Transmit Message
NAV PORT, MESSAGE OUTPUT PORT, ACTIVE
PORT, EGC OUTPUT PORT, NETWORK SETUP
on System Setup menu
Waypoint on EGC Setup
Edit Transmit EGC
Log
<Press ESC key to continue>
Location of error messages and alerts
Logs
Reports Options
Send Message Log
LES Priority Send Status
CAUTION
Setup Position StopAlarm
Delivery