Accessing The Code Number Services - Furuno FELCOM 16 Operator's Manual

4. INMARSAT C OPERATIONS
4.1.6

Accessing the code number services

A range of special safety and general maritime services, known as the code
number services, may be transmitted. The list on the next page shows the code
number services available.
To access a code number service do the following:
1. Using the text editor, prepare message requesting a code number service.
2. Press the [F3] key to open the Transmit menu.
3. Press the [1] key to display the Transmit Message menu.
Not used.
4. Press the [↓] key twice to choose Destination Type.
5. Press the [Enter] key to open the destination type options window.
6. Press the [↓] or [↑] key to choose SPEC (Special).
7. Press the [Enter] key to close the window.
8. Press the [↓] key to choose Station ID.
9. Press the [Enter] key to open the station ID entry window.
10. Key in code number referring to the table on the next page.
11. Press the [Enter] key to close the window.
4-20
Displayed if toll charges have been entered. See para. 2.6.1.
Transmit
File Edit EGC
Transmit
1. Transmit Message
2. Cancel
Priority Normal
3. Request Delivery Status
Message File
Message now being edited
Station Name
Destination Type TELEX
Prefix Code
Country/Ocean Code
Station ID
Modem Type
Address
---- * ---------+---------+---------+---------+---------+---------+---------<
Subject
25 Char.
Attach File
LES ID
Option
Confirmation ON
Send Delay 00:00
Delivery Delay Immediate
Code IA5
[ TRANSMIT ]
Transmit message menu
Reports Logs Options Setup
<[1] UNTITLED1>
Transmit Message
Size
Cost ********.**(US$)
[ Line 2/ 2 Col. 1 ]
Position StopAlarm
24
[Insert ]