Troubleshooting
Print job takes longer than expected
Action
Step 1
Change the environmental settings of the printer.
a
From the printer control panel, navigate to:
Settings > General Settings
b
Select Eco‑Mode or Quiet Mode, and then select Off.
Note: Disabling Eco-Mode or Quiet Mode may increase the
consumption of energy or supplies, or both.
Did the job print?
Step 2
Reduce the number and size of fonts, the number and complexity of
images, and the number of pages in the print job, and then resend the job
Did the job print?
Step 3
a
Remove held jobs stored in the printer memory.
b
Resend the print job.
Did the job print?
Step 4
a
Disable the Page Protect feature.
From the printer control panel, navigate to:
Settings > General Settings > Print Recovery > Page Protect > Off
b
Resend the print job.
Did the job print?
Step 5
Install additional printer memory, and then resend the print job.
Did the job print?
Job prints from the wrong tray or on the wrong paper
Action
Step 1
a
Check if you are printing on paper that is supported by the tray.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
Yes
No
The problem is solved. Go to step 2.
The problem is solved. Go to step 3.
The problem is solved. Go to step 4.
The problem is solved. Go to step 5.
The problem is solved. Contact
support.
Yes
No
The problem is solved. Go to step 2.
210
customer