Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings; Using The Standard Bin And Paper Stop - Lexmark MS510 User Manual

Using MS510dn and MS610dn

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information,
see "Avoiding jams" on page 176 and "Storing paper" on page 113.

Setting the paper size and type

1
From the printer control panel, navigate to:
> Settings >
2
Press the up or down arrow button to select the tray or feeder, and then press
3
Press the up or down arrow button to select the paper size, and then press
4
Press the up or down arrow button to select the paper type, and then press

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer
menus.
Notes:
• The smallest Universal paper size is 6 x 127 mm (3 x 5 inches), and is supported only from the multipurpose
feeder.
•
The largest Universal paper size is 216 x 355.6 mm (8.5 x 14 inches), and is supported from all paper sources.
1
From the printer control panel, navigate to:
> Settings >
measure >
2
Select Portrait Width or Portrait Height, and then press
3
Press the left or right arrow button to change the setting, and then press

Using the standard bin and paper stop

The standard bin holds up to 150 sheets of 20‑lb paper. It collects prints facedown. The standard bin includes a paper
stop that keeps paper from sliding out the front of the bin as it stacks.
> Paper Menu > > Paper Size/Type >
> Paper Menu > > Universal Setup >
.
.
to change the settings.
> Units of Measure >
.
.
40
> select a unit of