Network/Ports Menu - Lexmark MS510 User Manual

Understanding the printer menus
Use
Network Setup Page
Profiles List
Print Fonts
PCL Fonts
PostScript Fonts
Print Directory
Asset Report

Network/Ports menu

Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menus
Note: Only active ports appear in this menu. All inactive ports are omitted.
Use
PCL SmartSwitch
On
Off
To
Print a report containing information about the network printer settings, such as
the TCP/IP address information.
Note: This menu item appears only in network printers or in printers connected
to print servers.
Print a list of profiles stored in the printer.
Note: This menu item appears only when LDSS is enabled.
Print a report of all the fonts available for the printer language currently set in
the printer.
Note: A separate list is available for PCL and PostScript emulations.
Print a list of all the resources stored in an optional flash memory card or printer
hard disk.
Notes:
•
Job Buffer Size must be set to 100%.
•
Make sure the optional flash memory or printer hard disk is installed
correctly and working properly.
•
This menu item appears only when a flash or disk option is installed.
Print a report containing printer asset information, such as serial number and
model name.
To
Notes:
• Auto is the factory default setting.
•
This menu item appears only when an optional network card is installed.
To
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
When Off is used, the printer does not examine incoming data. The printer
uses PostScript emulation if PS SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if PS SmartSwitch is set to Off.
127