Lexmark MS510 User Manual page 85

Using MS610de
3
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
•
Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them, and then fan
them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
•
Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level
surface.
4
Load the paper or specialty media.
Note: Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper
guides. Overfilling may cause paper jams.
85