Print Job Takes Longer Than Expected; Job Prints From The Wrong Tray Or On The Wrong Paper; Incorrect Characters Print - Lexmark C925 User Manual

Troubleshooting
M
AKE SURE THE PRINTER HAS SUFFICIENT MEMORY
Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.

Print job takes longer than expected

Try one or more of the following:
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the print
job.
T P P
URN OFF THE AGE
From the home screen, navigate to:
> Settings > General Settings > Print Recovery > Page Protect > Off >
C
HANGE THE ENVIRONMENTAL SETTINGS
When using Eco‑Mode or Quiet Mode settings, you may notice a reduction in performance.

Job prints from the wrong tray or on the wrong paper

C
HECK THE PAPER TYPE AND PAPER SIZE SETTINGS
Make sure the paper type setting matches the paper loaded in the tray:
1
From the printer control panel Paper menu, check the paper type and paper size settings.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the paper type from Print Properties.
•
For Macintosh users, specify the paper type from the Print dialog.

Incorrect characters print

M
AKE SURE THE PRINTER IS NOT IN
If Ready Hex appears on the display, then you must exit Hex Trace mode before you can print your job. Turn the
printer off and back on to exit Hex Trace mode.
ROTECT SETTING
H T
EX RACE MODE
180